Neutral Bonding Silicone Sealant

Neutral Bonding Silicone Sealant

CS Neutral Structural Sealant is a neutral silicone structural sealant that complies with industry standards JG/T 475 and the European structural adhesive standard ETAG002. It offers excellent structural bonding performance and weather resistance. Available colors include white, black, and transparent, and custom colors can also be provided upon request.
Send Inquiry

Product information

 

Item

Typical Value

Test Method / Standard

Appearance

Uniform, smooth paste; no crusting/bubbles

Visual Inspection

Curing Type

Neutral cure (alcohol-based or oxime-based)

-

Tack-Free Time (25°C, 50% RH)

5 – 30 minutes

GB/T 13477.5

Curing Rate

2 – 4 mm / 24 hours

GB/T 13477.5

Density

1.30 ± 0.10 g/cm³

GB/T 13477.2

Shore A Hardness

25 – 35

GB/T 531.1

Tensile Strength

≥ 0.8 MPa

GB/T 528

Elongation at Break

≥ 400%

GB/T 528

Tear Strength

≥ 10 kN/m

GB/T 529

Modulus @23°C (23% elongation)

0.4 – 0.6 MPa

GB/T 22083

Movement Capability

±25% ~ ±50%

GB/T 22083 / ISO 11600

Adhesion to Various Substrates

Good adhesion, no substrate failure

GB/T 13477.8

Mildew Resistance Grade

Grade 0 (Excellent, top level)

ASTM G21 / GB 1741

Temperature Resistance

-50°C to +180°C

-

UV Aging Resistance

No cracking, chalking, or peeling

Artificial Weathering Test

Shrinkage Rate

≤ 10%

GB/T 13477.6

VOC Content

≤ 30 g/L (low VOC, eco-friendly)

US EPA Method 24 / GB 18583

Packaging

300mL (cartridge) / 590mL (sausage)

-

Shelf Life

12 months (unopened, stored below 25°C)

-

2025101414182846944
2025101414182947144

Performance:

2025092817193457936
  • CS neutral structural sealant is a neutral curing silicone structural sealant designed for structural bonding and sealing of glass, stone (marble, granite), aluminum curtain walls, glass skylights and metal structural engineering.

 

  • It complies with the industry standard JG/T 475 and the European structural adhesive standard ETAG002, and has excellent structural bonding performance and weather aging resistance.

 

  • After artificial accelerated weather aging test, the physical and chemical properties of the sealant have no obvious changes.

 

  • When in use, the glue gun squeezes the glue on the sealant tube to the part that needs to be bonded and sealed.

 

  • The sealant absorbs moisture in the air at room temperature, solidifies into an elastomer, and forms an effective seal.

 

Product Features

 

  • CS neutral structural sealant is a single component.
  • Neutral curing, no corrosion to metal, coated glass, concrete and marble;
  • Excellent weather aging resistance, service life of 50 years under normal climatic conditions;
  • Excellent high and low temperature resistance, no brittleness, hardening or cracking at -50℃ after curing, no softening or degradation at 150℃, maintaining good strength and elasticity;
  • Excellent adhesion to most building materials;
  • Good compatibility with other neutral silicone adhesives.

 

 

Exterior Applications

Sealing of connection and expansion joints in the building industry

Sealing of perimeter joints

Sealing of joints between glazing and supporting structures (frames, transoms, mullions)

Usage restrictions

 CS neutral structural sealant should not be used in airtight and unventilated places, because single-component silicone structural sealant needs to absorb moisture in the air to solidify;

 When the surface temperature of the material is lower than 10℃ or higher than 40℃, it is not suitable for construction;

 It is not suitable for frosted or damp surfaces;

 It is not suitable for places that are continuously immersed in water or damp all year round;

 It should avoid contact with rubber materials (such as rubber strips, rubber pads, etc.) to avoid yellowing;

 It should avoid contact with acidic or alkaline substances (such as exterior wall cleaning fluid) to avoid discoloration;

 It is not suitable for all materials that will ooze grease, plasticizers or solvents, such as the surface of oiled wood.

 After the original packaging is sealed, store in a cool (below 27℃) and dry place for at least 12 months.

Product Details

1
2
3

product-833-372

FAQ

 

Is a primer required before application?

In most cases, a primer is not needed for common substrates. However, for porous or difficult-to-bond surfaces, a compatibility test or primer may be recommended to ensure optimal adhesion.

 

Hot Tags: neutral bonding silicone sealant, China neutral bonding silicone sealant manufacturers, suppliers, factory, Neutral Bonding Silicone Sealant, boat sealant, structural glazing sealant, Fast Drying Anti Mold Sealant, Fireproof Sealant, mastic duct sealant

Send Inquiry